CDN 33
- The Leader in DJ Technology
©2001 Numark Industries
- 12 -
http://www.numark.com
MATCHING THE BEATS PER MINUTE (BPM)
Match the tempo by monitoring the music of both PLAYER 1 and PLAYER 2 by ear and adjusting the pitch. When the
tempo of the music of the selected CD player is slow compared to the tempo of the other player, move the slider to the “+”
side and match the tempo. When faster, move the pitch slider to the “-“ side. The following description is for the case of
matching the pitch of PLAYER 2 to the pitch of the music being played on PLAYER 1.
Press PLAY/PAUSE to start PLAYER 1
PLAYER 1 is playing
Press PLAY/PAUSE to start PLAYER 2
Both CD players are playing discs.
Listen to PLAYER 2 in your headphones
When PLAYER 2 is slow
compared to PLAYER 1
speed up PLAYER 2
When PLAYER 2 is fast
compared to PLAYER 1
slow down PLAYER 2
MATCHING BEATS USING PITCH BEND
If you find the BPM’s (Beats Per Minute or Tempos) are the same, however, the drumbeats are not matched you will need
to temporarily change the pitch. This description is for the case of matching the beat of PLAYER 2 to the beat of the music
being played on PLAYER 1. (This procedure can be done on either PLAYER).
After matching the BPM’s adjust the pitch temporarily as follows:
When PLAYER 2 is behind rotate the jog wheel
clockwise or press
to bend pitch faster
or
When PLAYER 2 is ahead rotate the jog wheel counter
clockwise or press
to bend pitch slower.
or
The pitch changes automatically while the jog wheel is rotated or buttons are pressed. The faster you rotate the wheel or
longer you press the buttons, the more you change. Releasing the wheel and buttons results in a return to the original
pitch and BPM.