Filter
Top Products
CDN-22S
- The Leader in DJ Technology
©1999 Numark Industries - 8 - http://www.numark.com
DESCRIPTION CDN-22S REMOTE FEATURES
1. PROGRAM - Depress this button and the unit will
stop and the program indicator will light. Select
each track to be programmed and press the
PROGRAM button between selections. You can
program up to 30 tracks. Press PLAY to start the
program. To exit and erase program hold the
program button down for more than 2 seconds while
the unit is stopped, open the disc tray, or turn off the
power.
2. CONT/SING - Will cause just a single track to play or
all tracks in order by pressing once or twice.
3. LCD DISPLAY - Indicates all the functions, as they
are occurring, with the CD. These functions are
explained in the next section.
4. TIME (Time Button) - The TIME button switches the
time display between elapsed playing time and
remaining time on the track. Holding for more than
one second activates auto-start functions.
5. OPEN/CLOSE (Disc Tray Open/Close) - Press to
load or eject the disc. Each press will open or close
the disc tray on the transport. NOTE: Tray will not
open unless the disc has been paused.
6. TRACK (Track Buttons) - These buttons are used
to select the track to be played.
7. Track 10 Button - This button is for quickly
advancing to higher tracks on a CD.
8. PITCH (Pitch Button) - This button activates the
Pitch Slider (14).
9. PITCH BEND (Pitch Bend Button) - When each of
the two CD players is playing a CD, the pitch bend
function allows the positioning of the bass beats to
be matched after the pitch of each disc is matched.
Either player can “catch up” or “fall back” to match
the other player. The pitch will automatically rise
while the + button is pressed (allowing “catch up”)
and return to the original pitch when the button is
released. The pitch will automatically drop while the
button is pressed (allowing “fall back”) and return to the
original pitch when the button is released. By changing
the pitch of one disc with respect to the other in this
way the beats can be matched.
10. SEARCH WHEEL (OUTER RING) - This wheel has 3
forward and 3 reverse speed positions for searching
through songs. The more you turn the wheel in either
direction the faster you search through the music.
11. JOG WHEEL (INNER RING) - This jog wheel serves 2
functions depending on the current mode.
a) The jog wheel will act as a slow frame search
control when the CD is not playing but either
paused or set to a cue point. To set a new frame
cue point, spin the wheel then press play when you
have determined the proper position. Press CUE to
return to the “CUE POINT”.
b) The jog wheel will temporarily bend the pitch of the
music if the song is already playing by rotating the
wheel clockwise to speed up or counterclockwise to
slow down.
12. CUE - Pressing the CUE button during play provides a
return to the position at which play was started. If
PAUSE is used before CUE, that will become the cue
point. Alternately pressing the PLAY button and the
CUE button allows the CD to be played from the same
position any number of times. The CUE LED will light
up from the time the CUE button is pressed until the CD
has reset to the position at which play was started.
Steady lighting of this LED indicates the ready
condition.
13. START/PAUSE (Play/Pause Button) - Each press of
the Play/Pause Button causes the operation to change
from play to pause or from pause to play.
14. PITCH SLIDER - The pitch can be changed up to +/-
12% by pressing the PITCH button so the PITCH LED
is lit, then moving the sliding fader. The pitch will not be
changed if the PITCH LED is off.