Filter
Top Products
CDN-22MK III
- The Leader in DJ Technology
©2002 Numark Industries - 7 - http://www.numark.com
CONNECTIONS
Typical connection with a mixer is illustrated right.
a). Connect the output connection cords from the CD Player to the line
inputs of your mixer.
b) Connect the remote control connection cable from the Unit 1 connector
on the main unit to the Unit 1 connector on the remote control unit.
Repeat for Unit 2.
c) The output connection cords and the remote control connection cables
are supplied with the main unit. Be sure to use the remote control
connection cables which have been supplied. Use of another cable type
might cause damage.
d) Connect Relay or Fader start cables
For fader start attach both side of your CD play to a similarly equipped
DJ mixer, as in the top drawing.
For relay capability take the auto start cable and connect the two jacks
in the rear of your CD player.
MOUNTING YOUR CD PLAYER
e) Mount the units in your console or rack with 19” EIA rails.
f) The transport should be mounted not to exceed an angle of 15 degrees.
g) Your CD player can be affected by excess vibration so mount the units
in a secure environment if possible.