Filter
Top Products
2
2. Align the mount thread with the metal adapter on the bottom of the antenna and rotate the antenna
clockwise until it is securely screwed to the mount. Using a wrench, tighten the adapter to the mount.
3. Remove the dust cap from the antenna’s connector.
4. Attach the male TNC connector of the coaxial cable to the antenna’s TNC connector.
For the GPS-703-GGG-N, attach the male N-Type connector of the coaxial cable to the antenna’s
N-Type connector.
5. Attach the other end of the coaxial cable to the antenna input port of the receiving device.
The receiving device must provide power as detailed in the SPECIFICATIONS section of this guide. All
NovAtel GNSS receivers provide the necessary power through their antenna RF connectors.
ANTENNA CARE
The GPS-703-GGG and GPS-703-GGG-N are designed to withstand the elements, including rain, snow
and dust. However, to ensure your antenna performs optimally, keep the radome (the top surface of the
antenna) clean and brush off any ice and snow. In addition, ensure the connector remains clean and dry
and replace the dust cap when a cable is not connected.
The metal adapter on the bottom of the antenna is fixed in place. Do not attempt to remove it.
5/8 x 11
thread
"
3/8 - 7/8 9 - 22 mm"" ( )
Mount
Metal
adapter
Jam nuts
or flange
Coaxial
cable
TNC connector (N-Type
connector for GPS-703-GGG-N)