Filter
Top Products
driver's
helmet headset
(not included)
fuse
holder
5 amps
ground to frame—black wire
12v switchable—red wire
female
6-pin din
black
2-pin plug
Radar Detector
black
2-pin plugs
radar connection
black wire—
ground
connection
red wire—
power
connection
Optional
J&M Plug-and-Play
Radar Detector
Connection Harness
(Not Included)
Stereo/Nav Unit
Power Cable
(Not Included)
Stereo/Nav Unit Cradle
(Not Included)
3.5mm plug
MA-967
6-pin
brown plug
stereo audio source
MP3, iPod, Sat Radio, etc.
(not included)
Installation
1) Mount the MA-967 amplifier where desired in the left side of your fair-
ing or in a convenient location using the provided screws and nuts, dou-
ble back tape, and/or tie straps. Take into account the length of the
wires going to all of the components prior to mounting.
2) Using the supplied butt connectors, connect your Stereo/NAV unit
power harness to the red and black wires from the MA-967 amplifier.
Plug the 2.5mm mono and the 3.5mm stereo plugs from the MA-967 to
your music source or Stereo/NAV unit. Connect the brown 6-pin plug
from the harness to the brown 6-pin plug from the MA-967 amplifier.
(See Diagram) Note: The MA-967 amplifier can be used with your per-
sonal music device for stereo audio amplification into the drivers hel-
met headset. Simply plug the 3.5mm plug from the connection harness
into your music device and not use the 2.5mm mono plug.