Filter
Top Products
11Copyright © 2005 Nokia. All rights
2. Get started
■ Charge the battery
Check the model number of any charger before use with this device. This device is intended
for use when supplied with power from the Nokia ACP-12, ACP-8, and LCH-12 chargers.
Warning: Use only batteries, chargers, and enhancements approved by Nokia for
use with this particular model. The use of any other types may invalidate any
approval or warranty, and may be dangerous.
When you disconnect the power cord of any accessory, grasp and pull the plug, not
the cord.
Your device and its enhancements may contain small parts. Keep them out of reach of small
children.
1. Open the charger cover, and connect the lead from the charger to the charger
connector. See Figure 3.
2. Connect the charger to an AC wall socket.
The text Charging is displayed briefly if the headset is switched on. The battery
charge indicator scrolls on the display until the battery is full. If the battery is
completely discharged, it may take a few minutes before the indicator appears
on the display.
You can use the headset while the charger is connected.