Nokia HS-12W Headphones User Manual


 
11Copyright © 2005 Nokia. All rights reserved.
3. Select the headset (HS-12W) from the list of found devices.
4. Enter the passcode 0000 to pair and connect the headset to your phone. In
some phones you may need to make the connection separately after pairing.
See the user guide of your phone for details. You only need to pair the headset
with your phone once.
5. If the pairing was successful, appears on the headset display, and you can
start using the headset.
You can set your phone to connect with the headset automatically when the
headset is switched on. To do this in Nokia phones, change your paired device
settings in the Bluetooth menu.
Disconnect the headset from the phone
To disconnect the headset from your phone (for example, to connect the phone to
another Bluetooth device), do one of the following:
Switch off the headset.
Disconnect the headset in the Bluetooth menu of your phone.
Move the headset more than 10 meters (30 feet) away from the phone.
You do not need to delete the pairing with the headset to disconnect it.
Reconnect the paired headset to your phone
If you want to reconnect the paired headset to your phone, switch on the headset,
make the connection in the Bluetooth menu of your phone, or press and hold the
call/play key of the headset until Connecting is shown on the display.