Filter
Top Products
Getting started
8
3. When the battery is fully charged, the green indicator light is shown.
Disconnect the charger from the AC wall outlet and the headset.
When the battery charge falls low
The fully charged battery has power for up to 5 hours of talk time and up
to 120 hours of standby time. (In standby mode, the headset is switched
on but no call is in progress.)
When the battery is running out of power, the headset beeps and the red
indicator light starts to blink. Charge the battery as described above.
■ Switching the headset on or off
To switch on: Press and hold the power key for 2 seconds. The headset
beeps and the green indicator light starts blinking fast. The blinking
continues slower after the headset is connected to your phone.
To switch off: Press and hold the power key for 2 seconds. The headset
beeps and the red indicator light is displayed briefly.
■ Taking the headset into use for the first time
1. Make sure that your phone is switched on.
2. Switch on the headset.
3. Enter the Bluetooth menu of your phone and make sure that the
Bluetooth feature is activated.
9234572_hdw3_1_en.fm Page 8 Friday, September 2, 2005 3:08 PM