Filter
Top Products
10
The “Personalized Scheduler” function enables you to programme your
DMT to switch ON and OFF at the beginning and end of a selected pro-
gramme, for up to 8 different programmes. Your video recorder can then be
set to record ASTRO programmes at the designated time and date.
Select Programmes for Recording
• While watching ASTRO programmes, press GUIDE. Refer to Chapter 3 for
more information on the Channel Guide.
• While in the Channel Guide screen, use the
, , and
buttons to navigate the cursor to the programme which you would like
the DMT to automatically switch ON (e.g. for recording purposes)
• Press the OK button to tag the selected programme into your personalized
scheduler.
• Note that a ✓ symbol will be displayed beside the tagged programme.
• You can store a maximum of 8 programmes in your personalized scheduler.
• Alternatively, to delete a tagged programme from your personalized
scheduler, navigate the cursor to the tagged programme and press OK
again. The ✓ symbol will disappear.
• Press GUIDE again to return to normal TV viewing.
CHAPTER 6 : Using the Personalized Scheduler
Setting the Video Recorder
These steps above will now activate your DMT to switch ON at the selected
appropriate time and date. But if you want to record the ASTRO pro-
gramme, you must also set up your video recorder to start recording at the
appropriate time and date.
Important : It is NOT possible to record one ASTRO channel while
watching another ASTRO channel at the same time.
Inspect Tagged Programmes
• While watching ASTRO programmes press MENU. The main menu screen
will appear.
• Press 5 on the numeric keypad. A list of all tagged programmes for re-
cording will appear.
• Your personalized scheduler list will indicate the following
o Item number (column 1)
o Date (column 2)
o Channel name (column 3)
o Start time (column 4)
o Stop time (column 5)
• Press MENU twice to return to normal viewing.
Note : Unforeseen circumstances may occur occasionally in which ASTRO
may be forced to alter the programme time and/or date. In such in-
stance, the tagged programme time and date in your personalized
scheduler will no longer be correct and you will need to tag again.