Filter
Top Products
Get started
7
1. Connect the charger to a wall outlet.
2. Connect the charger cable to the charger connector. The indicator
light is red while charging. It may take a while before charging starts.
If charging does not start, disconnect the charger, plug it in again,
and retry.
Charging the battery fully takes less than 1 hour and 15 minutes.
3. When the battery is fully charged, the indicator light turns green.
Disconnect the charger from the headset and the wall outlet.
The fully charged battery has power for up to 18 hours of talk time, up to
2 weeks of standby time, or up to 19 hours of music playing time.
However, the times may vary with different compatible Bluetooth
devices, usage settings, usage styles, and environments.
When battery power is low, the headset beeps at regular intervals, and
the indicator light slowly flashes red. Recharge the battery.
■ Switch the headset on or off
Switch on
To switch on, press and hold the multifunction key for about 2 seconds.
The headset beeps, and the green indicator light is briefly displayed.
When the headset tries to connect to the paired mobile phone or music
player that you have last used with it, the indicator light slowly flashes
green. When the headset is connected to a paired device and is ready for
use, the indicator light slowly flashes blue. If the headset has not been
paired with a device, it automatically enters the pairing mode (see “Pair
and connect the headset,” p. 8).
If you connect the headset to a device but do not use it for a while,
switch off the headset to save power.
Switch off
To switch off, press and hold the multifunction key for about 5 seconds.
The headset beeps, and the red indicator light is briefly displayed.