Filter
Top Products
5 Carrying clip
6 Charger connector
Start using your headset
When you switch on your headset for the first time, voice prompts help you set up your
headset.
The headset comes with different sized earpads. Select the earpad that fits the best and
is the most comfortable for your ear. To change the earpad, pull the current earpad from
the earpiece, and push the new earpad into place.
1 To switch the headset on, remove it from the carrying clip. If the headset doesn't
switch on, charge the battery.
2 Gently push the earpiece into your ear.
3 To select the language, follow the voice prompts. You can select English or Chinese.
Pairing mode is activated.
4 To pair the headset with a compatible device, follow the voice prompts.
Charge the battery
Warning:
Use only chargers approved by Nokia for use with this particular model. The use of any
other types may invalidate any approval or warranty, and may be dangerous. Use of
unapproved chargers may present a risk of fire, explosion, or other hazard.
1 Connect the charger to a wall outlet.
2 Place the headset in the carrying clip.
3 Connect the charger cable to the charger connector in the clip. The red indicator
light turns green when the battery is fully charged.
4 Disconnect the charger from the carrying clip, then from the wall outlet.
4