Nokia BH-606 Headphones User Manual


 
ENGLISH
Before using the headset, you must
charge the battery and pair the
headset with a compatible phone.
Parts of the device are magnetic. Metallic
materials may be attracted to the device.
Do not place credit cards or other
magnetic storage media near the device,
because information stored on them may
be erased.
Charge the battery
Before charging the battery, carefully
read “Battery and charger
information”.
Warning: Use only chargers
approved by Nokia for use
with this particular model.
The use of any other types may invalidate
any approval or warranty, and may be
dangerous.
When you disconnect the power cord of
any accessory, grasp and pull the plug,
not the cord.
1. Connect the charger to a wall
outlet.
2. Connect the charger cable to the
charger connector. During
charging, the indicator light is on
and the headset cannot be used.
Charging the battery fully may take
up to 2 hours.
3. When the battery is fully charged,
the indicator light turns off.
Disconnect the charger from the
headset, then from the wall outlet.
If the headset was connected to
your phone before charging, the
headset connects to it again.
The fully charged battery has power
for up to 8 hours of talk time or up to
280 hours of standby time.
When the battery is discharged, the
headset beeps every minute and the
indicator light flashes quickly.