Filter
Top Products
10
WWW.NILESAUDIO.COM
INSTALLATION CONSIdERATIONS
CABLE ANd wIRE
It will be easier to recongure or troubleshoot your system in the future if you
label the cables and wires for their destination or source, rather than which
terminal of the Niles System Integration Amplier
®
they are connected to.
The Niles System Integration Amplier
®
connects to your sources via shielded
line level audio cables with RCA phono plugs. Use high quality cables with your
Niles amplier for the lowest possible noise and best overall performance. Your
Niles dealer can recommend the proper cable.
The Niles System Integration Amplier
®
connects to your speakers using 2
conductor speaker wire. For most applications, we recommend you use 16
or 18 gauge wire. For wiring runs longer than 80 feet, we recommend 14
gauge wire. The binding posts of the Niles System Integration Amplier
®
will
accommodate up to 12 gauge wire. Larger sizes can be accommodated by
attaching banana plugs to the wire. Note that the binding posts accept dual
banana or single banana connectors.
SPEAKER 6
L+ L- R- R+
AMPLIFIER
L+ L- R- R+ L+ L- R- R+ L+ L- R- R+ L+ L- R- R+ L+ L- R- R+
SPEAKER 5 SPEAKER 4 SPEAKER 3 SPEAKER 2
L+ L- R- R+
SPEAKER 1
CONSTANT
PROTECTION
ON OFF
Niles Audio
Corporation,Inc.
Miami, Florida USA
NILES
Systems Integration Amplif ier
®
TECh TIp
Wire size is expressed by its AWG (American
Wire Gauge) number. The lower the number,
the larger the wire, i.e. twelve AWG is physically
larger than fourteen AWG.