Filter
Top Products
SPEAKER 6
L+ L- R- R+
AMPLIFIER
L+ L- R- R+ L+ L- R- R+ L+ L- R- R+ L+ L- R- R+ L+ L- R- R+
SPEAKER 5 SPEAKER 4 SPEAKER 3 SPEAKER 2
L+ L- R- R+
SPEAKER 1
C
ONSTANT
PRO
TECTION
ON
OFF
N
iles Aud
io
Corporation, I
nc.
Miami, Florida USA
N
ILES
Speaker selection systems allow each pair of speakers to be turned on and off from your
equipment location (or even via remote control).
INSTALLATION CONSIDERATIONS
8
It will be easier to reconfigure or troubleshoot your system in the future if you
label the cables and wires for their destination or source, rather than which
terminal of the SI-2125 they are connected to.
The SI-2125 connects to your sources via shielded line level audio cables with
RCA phono plugs. Use high quality cables with your Niles amplifier for the lowest
possible noise and best overall performance. Your Niles dealer can recommend
the proper cable.
The SI-2125 connects to your speakers using 2 conductor speaker wire. For most
applications, we recommend you use 16 or 18 gauge wire. For wiring runs longer
than 80 feet, we recommend 14 gauge wire. The binding posts of the
SI-2125 will accommodate up to 12 gauge wire. Larger sizes can be accommodated
by attaching banana plugs to the wire. Note that the binding posts accept dual
banana or single banana connectors.
Niles HDL-6 Speaker Selection System
Niles SI-2125