Niles Audio SI-2100 Stereo Amplifier User Manual


 
15
NILES AUDIO CORPORATION – 1-800-BUY-HIFI – 1-760-710-0992
2 Channel, BridgaBle Power amPlifiers
INSTALLATION
LINE LEvEL AUdIO INpUT
CAUTION! The amplier must be off whenever you make changes to the input
connections.
CASCAdE AUdIO OUTpUTS
The “Cascade Audio Outputs” enable you to connect another amplier to
your preamplier output. The connectors are gold-plated RCA phono jacks.
Connect them to another amplier’s inputs with a standard audio patch cable.
The outputs are not buffered; if you wish to daisy-chain more than 5 Niles
System Integration Amplier
®
ampliers you will need a Niles AVDA-3 buffered
distribution amplier. A single AVDA-3 will allow you to daisy-chain 5 ampliers
from each of its three outputs, allowing for as many as 30 Niles System
Integration Amplier
®
models to be fed from the same master preamplier. If
your preamp has a vacuum tube output stage, you must use a Niles AVDA-3 to
drive more than a single Niles System Integration Amplier
®
.
STEP DESCRIPTION
1. Label all of the interconnecting cables
for the sources they connect to.
Use audio patch cables with RCA
phono plugs attached to the ends.
2. Connect the sources by inserting the
RCA plugs into the amplifier’s jacks.
Connect outputs from your sources
to inputs on the amplifier. Never
connect a source or preamplifier’s
input (e.g., record inputs) to
the inputs of your Niles System
Integration Amplifier
®
.