Filter
Top Products
21
NILES AUDIO CORPORATION – 1-800-BUY-HIFI – 1-760-710-0992
2 Channel, BridgaBle Power amPlifiers
INSTALLATION
SpEAkER wIRE CONNECTIONS
CAUTION! All speaker wire connections must be made with the amplier off.
Bare Wire
Unscrew the red or
black plastic knob,
insert the bare wire
end into the opening,
and then tighten the
knob until the wire is
securely clamped
Banana Plugs
There are many types of
banana plugs, some crimp,
some solder. The Niles
gold banana plug has 3
quick-connect binding
post for the bare wire on
the body of the plug. A
banana plug is simply
inserted into the jack at
the end of the amplier’s
binding post. Dual banana
plugs will t the binding
post.
STEP DESCRIPTION
1. Label all wires.
If you label the wires for their destination, rather than which
terminal of the SI-1230 they are connected to, it will be easier
to reconfigure your system in the future.
2. Connect one stripped wire end or banana
plug to the black terminal and one to the
red terminal. CAUTION- Avoid having even a
single strand of wire touching the chassis or
another connector.
A. Split the speaker wire insulation so that at least two inches
of each conductor are separated.
B. Strip one half inch of insulation from the end of each
conductor of the speaker wire
C. Attach banana plugs or twist the strands of wire together
and insert them into the appropriate binding post.