Filter
Top Products
Installing the Security Bracket and Cable
1. With the loudspeaker in the proper location per the layout, turn the loudspeaker
over so the bottom of the loudspeaker is facing you, as shown in
Figure 7.
2. Take the nylon security cable, supplied with the loudspeaker and fold it in half.
Using the middle of the cable, feed it through the Security Attachment Eyelet as
shown in
Figure 8.
3. Feed the opposite end of the nylon security cable through the exposed portion
of the cable that was just fed through the security eyelet, as shown in
Figure 9 and 10.
INSTALLATION
13
Figure 7 Bottom of Loudspeaker
Figure 9 Security Cable
Looping Through
Figure 10 Security Cable after Looping
Figure 8 Security Cable in Eyelet