Filter
Top Products
Specifications
Model PSW800
Driver Complement
8” Mica-filled polypropylene dual voice coil
woofer with inverted butyl-rubber suspension
and dust cap
Design Principle
Infinite baffle for large and varying air volumes
Recommended Amplifier Power
Ten to one hundred fifty watts per channel
Impedance
8 Ohm - Single Subwoofer in Stereo
4 Ohm - Single Subwoofer with Voice Coils
Paralleled for full monophonic output
Frequency Response
35 Hz to 140 Hz, plus or minus 3dB
(on axis)
Sensitivity
89 decibels for 2.83 volts of pink noise,
measured at 1 meter on axis
Overall Exterior Frame Dimensions
10-3/16” x 14-1/4”
Depth Behind Wall
3-3/4” (assumes 1/2” drywall)
Wall Cut-Out Dimensions
9-1/8” x 13-1/8”
Connections
Left and right channel input and outputs via
spring loaded push terminals. Accommodates
up to 14 gauge wire.
19
Specifications