Filter
Top Products
Connections
Single Stereo Subwoofer
A four conductor wire (Left+, Left-, Right+
and Right-) 16 gauge or larger is run from
the amplifier location to the local volume
control.
(See Figure 4).
From the local volume control, the four
conductor cable is run to the PSW8 and
connected to the Input connectors. A two
conductor wire is connected to each of the
stereo outputs and fed to the left and right
speakers. Now, the volume control will
raise and lower the volume for the sub-
woofer and the left and right speakers
simultaneously. Additionally, the crossover
is now connected so that the crossover
switches can be adjusted.
Dual Subwoofer Systems
A four conductor wire (Left+, Left-, Right+
and Right-) 16 gauge or larger is run from
the amplifier location to the local volume
control.
(See Figure 5).
From the local volume control, a two con-
ductor cable is run to each of the PSW8s
and connected to either the left or the right
Input connectors.
Each of the satellite speakers must be con-
nected to the correct subwoofer. Typically,
a two conductor wire is connected from the
left channel output on the left channel sub-
woofer and fed to the left satellite speaker
and another two conductor wire connects
from the right channel subwoofer output to
the right channel satellite.
5
Connections
LEFTIN
LEFTOUT
RIGHTOUT
RIGHTIN
L
L
WF WF
R
SW2
SW1
C
H
H
C
L
—
+
PSW-800 PASSIVESUBWOOFER Niles Audio Corporation, Inc.
LEFTIN
LEFTOUT
RIGHTOUT
RIGHTIN
L
L
WF WF
R
SW2
SW1
C
H
H
C
L
—
+
PSW-800 PASSIVESUBWOOFER Niles Audio Corporation, Inc.
Left Right
PSW800 PSW800
Amplifier
Either
Input
OK
Wire to
Corresponding
Output
Satellite Speaker Satellite Speaker
Left Right
PSW8
Amplifier
Left and Right
Input terminals
Left and Right
Output terminals
Satellite Speaker Satellite Speaker
Figure 4
A Single PSW8 Hook-Up
Figure 5
A Dual PSW8 Hook-Up