Filter
Top Products
19
Specifications
CM8HD
Driver Compliment
8" injection-molded TCC (talc, carbon and
ceramic filled) with rubber surround
1" fluid-cooled ultra-wide dispersion
tri-laminate Teteron tweeter in a custom
pivoting coaxial enclosure
Recommended Amplifier Power
10 to 150 watts per channel
Nominal Impedance
4 or 8 ohm selectable
Frequency Response
40Hz to 21kHz, +/- 3dB (on axis)
Tweeter Adjustment
Up to 20° pivot angle
Sensitivity
90dB for 2.83 volts of Pink Noise
Overall Exterior Frame Dimensions
10-5/8" diameter
Depth Behind Wall
4" deep (based on /2" drywall)
Wall Cut-Out Dimensions
9-1/2" diameter
Wiring Requirements
We recommend 16 to 18 gauge stranded
wire for up to 80 feet, 14 gauge stranded
wire for up to two hundred feet.
Connectors accommodate 12 to 20 gauge
stranded wire.
Specifications