Niles Audio CM730SI Speaker User Manual


  Open as PDF
of 2
 
SPECIFICATIONS SHEET
Loudspeaker Model Works With
Model Stock Number Previous Bracket New Bracket Metal Enclosure Hole Cover
CM730Si FG01304
NILES AUDIO CORPORATION 12331 SW 130 Street, Miami, FL 33186 1-800-BUY-HIFI – 305-238-4373 – www.nilesaudio.com
©2007 Niles Audio Corporation. All Rights Reserved. Niles, UltraSilk, Blending High Fidelity and Architecture and the Niles logo are registered trademarks of Niles Audio Corporation.
MicroPerf is a trademark of Niles Audio Corporation. CS0055B
P
RODUCT CONSTRUCTION AND ACCESSORIES
7
INCH STEREO INPUT CEILING MOUNT LOUDSPEAKER
7" Stereo Input Loudspeaker
with Pivoting Tweeter
CM730Si
Stock Number
FG01304
Features
■ Integrated woofer/baffle design delivers greater low frequency response by employing a
7" woofer where competitive models of the same outer size employ 6 1/2" woofers.
■ Polypropylene dual voice coil woofer reproduces left and right channel inputs from a
single speaker.
■ Treated urethane surround increases sensitivity and preserves durability
■ Dual 19mm pivoting fluid-cooled UltraSilk
®
tweeters provide wide dispersion for clear and
detailed high frequencies
■ Bridge-mounted stereo imaging (Si) tweeter array directs the high-frequency sounds from both
the left and right channels at opposing angles to preserve stereo separation
■ Includes flush-mount MicroPerf
™
aluminum grille for a clean and unobtrusive look.
■ Weather resistant construction reduces installation limitations and provides unique solutions in
showers or outdoors under eaves
Specifications
■ Frequency Response: 60Hz to 21kHz +/-3dB
■ Impedance: 8 ohm nominal; 6 ohm minimum
■ Recommended Amplifier Power: 10 to 100 Watts
■ Frame Dimensions: 9 1/4 inches (23.49 cm)
■ Hole cutout dimensions: 8 inches (20.32 cm)
■ Depth behind ceiling: 4 3/8 inches (11.11 cm)
Warranty: Lifetime Limited
CE 6
FG00944
CM6 Series
Bracket Kit
FG00655
CM700 BKT
FG01308
CM700 Hole Cover
FG01309
9-1/4" (23.49 cm)
Frame Outer
Diameter
8" (20.32 cm)
Hole
Cutout
4-3/8" (11.11 cm) Depth
8" (20.32 cm)
Hole
Cutout
4-11/16" (11.90 cm) Depth
 previous