Nady Systems CX-2314 Speaker User Manual


 
Frequency Response
Low Frequency Output ........................................10HZ +/- 0.5dB
High Frequency Output........................................20KHz +/-1.0dB
Total Harmonic Distortion
RL ........................................................................>2k
Low Frequency Output ........................................< 0.01% THD
High Frequency Output........................................<0.02% THD
Maximum Output Level
RL ........................................................................>2k +21 dBu (6.2 volts) @ < .05% THD 20Hz - 20kHz
Maximum Voltage Gain ....................................6dB
Constant-Directivity Correction ................+3dB @ 3.5kHz rising at 6 dB/octave to 22.5kHz
Power Supply ......................................................115V(60Hz) / 230V(50Hz) selectable
Fuse ..........................................................................0.5A/250V, 5x20 mm
Frequency Range
Low Mid (X1)........................................................100Hz to 920Hz
Mid-High (X10) ....................................................800Hz to 9.2kHz
Hum and Noise (20Hz- 20kHz) ......................Av=0 dB. fc=230.2.3kHz
Low Frequency Section
Output @0dB ......................................................<-98dBu
Mid Frequency Section
Output @ 0dB ......................................................<-95dBu
High Frequency Section
Output @ 0dB ......................................................<-93dBu
Signal-To-Noise Ratio........................................114dB
Controls
Input Level............................................................Continuously variable
Output Level ........................................................Low, High cont. Variable
Phase ..................................................................Rear panel switch
Mute ....................................................................Low. Mid, High front panel switches
CDBoost ..............................................................Rear panel switch
Channel link ........................................................Rear panel switch
Dimensions ............................................................19 x 7.7 x 1.7 (483 x 194.5 x 44 mm)
Weight ......................................................................5.5 lbs (2.5 Kg)
The specifications above are correct at the time of printing of this manual. For improvement purposes, all specifications for this unit,
including design and appearance, are subject to change without prior notice.
SPECIFICATIONS
9