NAD S25 Stereo Amplifier User Manual


 
PROVISIONAL SPECIFICATIONS - NAD S250
NOTE: NAD Electronics International reserves the right to change specifications or features without notice as design improvements are incorporated.
NAD is a registered trademark of NAD Electronics International.
All rights reserved. No part of this publication may be reproduced, stored, or transmitted in any form whatsoever without the written permission of NAD Electronics International.
Dolby is a registered trademark of Dolby Laboratories Ltd. THX is a registered trademark of Lucas Film Co.
Printed in Canada. © NAD Electronics International 02/01.
Continuous Average Power Output at 8
(Min. power per channel, 20Hz - 20kHz both channels driven with no more than rated distortion)
Rated distortion (THD 20Hz-20kHz)
Clipping power
IHF power dynamic headroom at 8
IHF power dynamic power
Damping factor
Input impedance
Input sensitivity
Voltage gain
Frequency response
Signal/noise ratio
Dimensions (W x H x D)
Net weight
Shipping weight
5 x 125W (21.0dBW)
<0.05%
0.05%
+1.4dB
8
172W (22.4dBW)
4
273W (24.4dBW)
ref. 8
, 50Hz >300
rated power into 8
50k
1.1 V
29.0dB
20Hz-20kHz +0, -0.2dB
2Hz to 100kHz -3dB
ref. 1W 95dB
ref. rated power 125dB
17
1/8
x 5
3/16
x 16
3/16
"
(435 x 132 x 410mm)
41.8 lbs (19.0kg)
46.2 lbs (21.0kg)
Power Amp Section
Physical Specifications