Filter
Top Products
PRE-AMP SECTION
Line level inputs
Input impedance (R and C) 20kΩ / 500pF
Input sensitivity
(ref. 1W) 165mV
Frequency response 20Hz - 20kHz / ±0.3dB
Line level outputs
Output impedance Pre-out 220Ω
Tape Source Z + 2kΩ
Video 220Ω
Tone controls
Treble ±5dB at 10kHz
Bass ±7dB at 100Hz
POWER AMP SECTION
Continuous output power into 8Ω * 40W (16dBW)
Rated distortion
(THD 20Hz - 20kHz) 0.03%
Clipping power
(maximum continuous power per channel) 55W
IHF Dynamic headroom at 8Ω +3.5dB
IHF dynamic power
(maximum short term power per channel) 8Ω 90W (19.5dBW)
4Ω 125W (21dBW)
2Ω 160W (22dBW)
Damping factor
(ref. 8Ω, 50Hz) >60
Signal/noise ratio ref. 1W 90dB
ref. rated power 104dB
Remote Yes
NAD Link Yes
PHYSICAL SPECIFICATIONS
Dimensions (W x H x D) 435 x 100 x 290mm
Net weight 6.5kg
Shipping weight 7.7kg
* Minimum power per chnnel, 20Hz - 20kHz, both channels driven with no more than rated distiortion.
Dimensions are of unit’s cabinet without attached feet; add up to 18mm for total height.
Dimension depth excludes terminals, sockets, controls and buttons.
© NAD Electronics. All rights reserved. E & OE