NAD 310 Stereo Amplifier User Manual


  Open as PDF
of 2
 
SPECIFICATIONS - NAD 310
Continuous average power output into 8Ω 20W (13dBW)
(Min power per channel, 20Hz - 20kHz both channels driven with no more than rated distortion)
Rated distortion (THD 20Hz - 20kHz) 0.05%
Clipping power (max continuous power per channel) 25W
IHF dynamic headroom at 8Ω +3dB
IHF dynamic power 8Ω 40W (17.0dBW)
(max short term power per channel) 4Ω 60W (17.8dBW)
2Ω 80W (18.7dBW)
Damping factor (ref. 8Ω 50Hz) >100
Frequency response 20Hz - 20kHz +0.3dB
10Hz/70kHz -3dB
THD (20Hz - 20kHz, from 250mW to rated power) <0.05%
Input impedance (R and C) Line inputs: 80kΩ+220pF
Input sensitivity (ref. rated power) Line inputs: 210mV
Signal to noise ratio (A weighted) 93dB ref. 0.5W
106dB ref. rated power
Frequency response (20Hz - 20kHz) +0.5dB
Tape output impedance Source Z + 1kΩ
Treble control ±6dB at 10kHz
Bass control ±7dB at 100Hz
Physical specifications
Dimensions (W x H x D) 435 x 65 x 250mm
Net weight 5kg
Shipping weight 6kg
NOTE: NAD reserves the right to change specifications or design at any time without notice. All specifications are those in effect at time of printing.
 previous