NAD 2700 Stereo Amplifier User Manual


 
POWER AMP SECTION
Continuous output power into 8 * 150W (21.7dBW)
Rated distortion (THD 20Hz - 20kHz) 0.03%
Clipping power (maximum continuous power per channel) 200W
IHF Dynamic headroom at 8 +4.3dB
IHF dynamic power (maximum short term power per channel) 8 400W (26 dBW)
4 600W (28 dBW)
2 800W (29 dBW)
Damping factor (ref. 8 , 50Hz) >120
Input impedance 20k / 820pF
Input sensitivity (for rated power into 8 ) 1.2V
Frequency response 1Hz - 80kHz / (+0, -3dB) THX
Signal/noise ratio ref. 1W 100 dB
ref. rated power 122 dB
THD (20Hz - 20kHz) <0.03%
Bridged Mode
Continuous output power into 8 * 400W (26 dBW)
IHF Dynamic headroom at 8 +5dB
IHF dynamic power (maximum short term power per channel) 8 1.2 kW (31 dBW)
4 1.6 kW (32 dBW)
PHYSICAL SPECIFICATIONS
Dimensions (W x H x D) 435 x 127 x 395mm
Net weight 13 kg
Shipping weight 14.3 kg
Power consumption (120 ~ 240V, 50/60Hz) 970VA
* Minimum power per chnnel, 20Hz - 20kHz, both channels driven with no more than rated distortion.
Dimensions are of unit’s cabinet without attached feet; add up to 18mm for total height.
Dimension depth excludes terminals, sockets, controls and buttons.
© NAD Electronics. All rights reserved. E & OE