NAD 2100 Stereo Amplifier User Manual


 
POWER AMP SECTION
Continuous output power into 8 * 60W (17dBW)
Rated distortion
(THD 20Hz - 20kHz) 0.03%
Clipping power
(maximum continuous power per channel) 70W
IHF Dynamic headroom at 8 +6dB
IHF dynamic power
(maximum short term power per channel) 8 200W (23dBW)
4 250W (24dBW)
2 330W (25dBW)
Damping factor
(ref. 8, 50Hz) >100
Input impedance 10k / 600pF
Input sensitivity
(for rated power into 8) 0.85V
Frequency response 3Hz - 100kHz / +0, -3dBdB
Signal/noise ratio ref. 1W 100dB
ref. rated power 117dB
THD
(20Hz - 20kHz) <0.03%
Bridged Mode
Continuous output power into 8 * 100W (20dBW)
IHF Dynamic headroom at 8 +7dB
IHF dynamic power
(maximum short term power per channel) 8 500W (27dBW)
4 660W (28dBW)
PHYSICAL SPECIFICATIONS
Dimensions
(W x H x D) 435 x 106 x 385mm
Net weight 9.5kg
Shipping weight 10.9kg
Power consumption
(120 ~ 240V, 50/60Hz) 330VA
* Minimum power per chnnel, 20Hz - 20kHz, both channels driven with no more than rated distiortion.
Dimensions are of unit’s cabinet without attached feet; add up to 18mm for total height.
Dimension depth excludes terminals, sockets, controls and buttons.
© NAD Electronics. All rights reserved. E & OE