NAD 208THX Stereo Amplifier User Manual


 
POWER AMP SECTION
Continuous output power into 8 * 250W (24dBW)
Rated distortion
(THD 20Hz - 20kHz) 0.03%
Clipping power
(maximum continuous power per channel) 300W
IHF Dynamic headroom at 8 +4dB
IHF dynamic power
(maximum short term power per channel) 8 600W (28dBW)
4 800W (29dBW)
2 1000W (30dBW)
Damping factor
(ref. 8, 50Hz) >200
Input impedance 20k / 700pF
Input sensitivity
(for rated power into 8) 1.6V
Frequency response 20Hz - 20kHz / ±0.3dB
Signal/noise ratio ref. 1W 96dB
ref. rated power 120dB
THD
(20Hz - 20kHz) <0.03%
Bridged Mode
Continuous output power into 8 * 500W (27dBW)
IHF Dynamic headroom at 8 +5dB
IHF dynamic power
(maximum short term power per channel) 8 1.6kW (32dBW)
4 2kW (33dBW)
PHYSICAL SPECIFICATIONS
Dimensions
(W x H x D) 435 x 175 x 370mm
Net weight 17.3kg
Shipping weight 19.9kg
Power consumption
(120 ~ 240V, 50/60Hz) 750VA
* Minimum power per chnnel, 20Hz - 20kHz, both channels driven with no more than rated distiortion.
Dimensions are of unit’s cabinet without attached feet; add up to 18mm for total height.
Dimension depth excludes terminals, sockets, controls and buttons.
© NAD Electronics. All rights reserved. E & OE