Filter
Top Products
X-LPS
V8
AMPLIFIER SPECIFICATIONS
Issue 1
Page 9 of 10
MM input: Input response: RIAA/IEC combined, see graph
Input sensitivity 3mV for 350mV out
Input impedance 47K Ohms
THD + N, 1KHz, 350mV out <0.01% typical
Overload margin 28dB
Signal/noise ratio >100dB ‘A’-weighted
MC input: Input response: RIAA/IEC combined, see graph
Input sensitivity 350µV for 350mV out
Input impedance 100 Ohms
THD + N, 1KHz, 350mV out <0.01% typical
Overload margin 28dB
Signal/noise ratio >100dB ‘A’-weighted
Output: Pre-out impedance 50 Ohms
RIAA accuracy ±0.25 dB 20Hz to 20KHz
-20.0
-15.0
-10.0
-5.0
0.0
5.0
10.0
15.0
20.0
20.0 31.5 50.0 80.0 125 200 315 500 1000 1600 2500 4000 6300 10000 16000
RIAA
PHONO
RIAA/IEC
PHONO RESPONSE
Frequency (Hz)
dB
Nominal phono response
Connections: Moving magnet
input:
1 pairs MM level RCA connectors,
Moving coil input: 1 pairs MC level RCA connectors,
Line level outputs: 1 pair RCA line level fixed RIAA
Earth post: 1 4mm banana plug/binding posts
Power
requirement:
12-0-12V (24V total)
AC at 500mA
Using mains adaptor (supplied)
Standard
accessories:
Power Supply Unit T48A-24-500-3 1 off
Dimensions: Main unit
180 mm 7 inches Wide
88 mm 3 ½ inches High including feet
240 mm 9 ½ inches Deep including terminals
Weight: 1.55 kg, 3 ½ lbs Unboxed
2.15 kg 4 ¾ lbs Boxed unit including power supply and all accessories
Musical Fidelity reserves the right to make improvements which may
result in specification or feature changes without notice.