Filter
Top Products
Instructions For Use. Page 4
X-AS100
INSTALLATION
INSTALLATION PRECAUTIONS
Your new X-AS100 is designed and built to provide trouble-free performance but as
with all electronic devices it is necessary to observe a few precautions. Please ensure
that you have complied with them before you connect any AC power to your ampli-
fier. Retain this guide for future reference.
þ Heed all warnings on the back of
the unit.
þþ Place your X-AS100 where there
is adequate ventilation.
þþ Only connect the unit to a power
supply of the type marked on the back
of the unit.
þþ Position the power supply lead
and signal interconnect leads where
they are not likely to be walked on or
trapped by items placed on them.
ýý Do not use near water.
ýý Do not place the amplifier near
direct heat sources such as radiators
or other equipment that produces
heat.
ýý Do not remove any covers or try
to gain access to the inside. The war-
ranty will be invalid if the unit has
been tampered with. There are no
user adjustments within. Refer all
service work to an authorised Musical
Fidelity agent.
ýý There are fuses in the X-AS100.
In the unlikely event that one blows,
take your X-AS100 to your audio
dealer. Do NOT try to replace the fuse
yourself or you will invalidate the
warranty.
BEFORE YOU SWITCH ON
You should make all connections to the X-AS100 before switching on.
Follow this routine before you listen for the first time, and each time you change any
connections.
1 Check all the inputs and outputs to the X-AS100.
2 Then check again.
3 Turn the volume control to nil.
4 Now you can switch on the power and carefully advance the volume to
the level you want and enjoy the music.