Filter
Top Products
X-RAY
V8
INSTALLATION
Issue 3: 1
st
September 2006
INTRODUCTION
Congratulations on the purchase of your new X-RAY
V8
CD player.
The X-RAY
V8
has extremely low jitter, vanishingly low
distortion, exemplary linearity and ultra low noise. Its
case design complements the X-
V8
series components
which include a DAB/FM tuner and integrated amplifier
all in the same convenient size.
Great attention has been paid to internal layout,
isolating each circuit section to prevent possible
interaction.
The CD digital data streams are first up-sampled to
192kHz, which moves noise, jitter and distortion
artefacts well above the audio band. They are then
passed through a new, low noise, low distortion 24-bit
dual-differential digital-to-analogue converter, which
allows simpler filtering of the analogue output. This in
turn gives an improved audio response without the need
for sharp filters that degrade sound quality. The result is
a CD player which has a smoother response than
previously possible with none of the “hardness” of other
units.
The resultant performance achieved by this unit is
among the best in the world. It has excellent signal to
noise ratio, low distortion, wide bandwidth, huge
dynamic range, extraordinary resolution and fine detail.
UPGRADE PATH
Early in 2007 two interesting new X-
V8
series products
are coming.
- The TRIPLE-X170 PSU is an upgrade Power Supply
Unit. It increases the power of your X-T100 to 85+85
wpc and improves its peak current. The TRIPLE-X170
PSU will power the X-T100, X-RAY
V8
and X-PLORA
V8
simultaneously. Any product connected to it will sound
better.
- The X-DAC
V8
is a super-performance Digital to
Analogue Converter with a tube output. Its performance
is verging on state-of-the-art and sounds extraordinary.
The X-DAC
V8
is self-powered and also has power
supply outlets for the X-RAY
V8
and X-PLORA
V8
. When
the X-RAY
V8
is paired with the X-DAC
V8
, what you
have is a mini KW25 system (the KW25 Transport/DAC
received incredible reviews which recon it’s probably
the best CD player ever).
INSTALLATION
Position the X-RAY
V8
on a stable, horizontal surface
where there is no risk of it being knocked, or subjected
to vibration such as from loudspeakers.
Protect your X-RAY
V8
from humidity - if the unit is
moved from a cold place to a warm room, or in
generally humid conditions, moisture can form on the
pickup lens inside the player, preventing the laser beam
from reading the disc. If this happens, remove the CD,
close the disc drawer, and leave the unit switched on for
an hour or so to allow sufficient time for the moisture to
evaporate.
AUDIO CONNECTIONS
Outputs: Connect your amplifier inputs to the RCA
sockets on the back panel marked as LEFT and RIGHT
outputs.
If desired, the unit can also be attached to an external
DAC of your choice. The unit outputs COAX and
OPTICAL digital signal stream at 44.1kHz.
POWER CONNECTION
The power lead should be connected to a Musical
Fidelity power supply unit designed for this product,
such as the TRIPLE-X (see your dealer for more
information). The connector from this CD player mates
with the 5-way socket labelled X-RAY
V8
on the rear of
the power supply unit. The connector should fit
comfortably with a small click when properly seated.
Do not force the connector.
NOTES ON USING COMPACT DISCS
Always hold discs by the edges and make sure they
remain clean - do not touch the surface. Keep discs
away from direct sunlight and heat sources, such as
radiators. Clean discs with a cloth before playing them,
but do not use solvents such as benzene, thinners, or
antistatic spray intended for analogue records.
After playing, always return the disc to its case for
storage.
CLEANING
Before cleaning the unit, switch off power at the mains
switch and remove the mains plug from the wall socket.
Clean the cabinet and remote control unit using a moist
cloth. We do not advise using solvents, white spirit or
thinners as they could damage the surface finish.
Page 7
of
15