Filter
Top Products
A3.2
CR
Power Instructions for Use Page 7 of 7
Power output 130 Watts per channel into 8 Ohms
Total harmonic distortion < 0.01% 20Hz to 20kHz
Frequency response 10Hz to 20kHz ±0.1dB
Channel separation > 85dB 20Hz to 20kHz
Audio gain 30dB (31.5 times)
Input impedance 31K Ohm
Signal / noise ratio, reference full output > 105dB unweighted
> 120dB ‘A’- weighted
Power consumption 600 Watts maximum
Dimensions 440 mm wide
100 mm high including feet
395 mm deep including terminals
Power requirements 100 / 115 / 230V AC, 50 / 60Hz
(factory preset)
Weight 15 kg unit only, unboxed
17 kg in shipping carton
Standard accessories IEC type mains lead
Issue 1: April 2002
Musical Fidelity reserves the right to make improvements which may result in specification or feature changes without notice.
SPECIFICATIONS
A3.2
CR
POWER AMPLIFIER