Filter
Top Products
A1 PRO CD
CD BASIC OPERATION
Issue 4: 6
th
May 2008
Page 11 of 16
PAUSE
1
0
:
03
STOP 7
PAUSE
Pressing the PLAY/PAUSE button on the front or top
panel whilst a disc is playing pauses playback of the
disc. PAUSE appears in the display windows instead of
PLAY. The disc will continue spinning, but the track
does not advance and the CD's output is muted.
Pressing PLAY/PAUSE again resumes playback from
the same place.
PAUSE (Remote control)
On the remote control, PLAY and PAUSE buttons have
separate functions at each end of the same button.
Pressing PLAY will only control disc play, and Pressing
PAUSE will not resume play. Note that if the disc is
already playing, pressing the PLAY button reverts to the
beginning of the current track.
STOP
Playback can be stopped at any time by pressing the
STOP button once. On the remote control, press either
end of the button, not the middle part.
TRACK SELECTION
To change track, the track skip buttons PREVIOUS and
NEXT on the front panel can be pressed to jump
forwards or backwards one track in either direction.
Corresponding TRACK buttons on the remote control
are marked |<< and >>|.
If the unit has stopped playing, a specific track can be
accessed directly by pressing either PREVIOUS or
NEXT to obtain the required track number, then
pressing PLAY/PAUSE.