Filter
Top Products
highest
directional
response in this
direction.
See figure 5. If
you want to
disperse the
sound in a 360-
degree pattern
you must
position the line
in the tweeter in
a horizontal
position.
See figure 6. The
combination of switch
settings allow you to
boost and cut bass
and treble +/-3dB.
Adjust the speaker
level to accommodate
for room acoustics.
Step 7. Divide each
adhesive bead strip
in half. (Adhesive
bead strips are in the
clear self-closing
bag). Place strips on
the edge of the grille
as shown in figure 7.
Reinstall the grille on
the speaker.
Step 8. Adhere the WG Series logo to the grille
with the pressure sensitive tape.
Repeat the steps for the second speaker.
Page 10
FIGURE 6
FIGURE 5
FIGURE 7
crease position
tweeter
horn
115986D.pdf 10115986D.pdf 10 11/16/2005 10:54:35 AM11/16/2005 10:54:35 AM