Morphy Richards AD29112 Stereo System User Manual


 
wwwwww..mmoorrpphhyyrriicchhaarrddssaauuddiioo..ccoomm
1100
frequency. When the tuning
goes to one station available,
broadcasting starts immediately.
NOTE: If a particular FM
(STEREO) station is weak, or
you hear too much background
noise, try pressing the
MONO/ST button to enter the
FM (MONO) mode. This can
often result in a much clearer
reception.
To store the current
radio station, follow
the steps below:
11
Press DEL/STORE/PROG
button on the remote control or
the program button on unit.
22
Press MEM Up or DOWN
button or directly press the
numeric buttons on the remote
control to select a memory
position.
33
Press the DEL/STORE/PROG
button again to sore frequency.
44
To recall the preset station
frequency, press the MEM UP or
DOWN button or the NUMERIC
buttons.
A total of 30 stations can be
stored in Memory, 20 for FM
and 10 for MW and the memory
will erased after you unplug the
unit.
RDS operation of
digital tuner
When the radio stops at a radio
station which supports RDS, the
LCD shows the radio name,
program type and radio text
step by step.
User can also select the
displayed text by pressing the
RDS mode button. The display
toggles as follows:
TYPE - RADIO TEXT - STATION
NAME
If a user wants to enjoy a
particular type of program, they
can press the PTY SEL button.
Press this button continuously,
the LCD shows as follows:
NEWS - AFFAIRS - INFO -
SPORT - EDUCATE - DRAMA -
CULTURE - SCIENCE - VARIED
M - POP M - ROCK M - MOR
M - LIGHT M - CLASSIC -
OTHER M - WEATHER -
FINANCE - CHILD - SOCIAL -
RELIGION - PHONE - TRAVEL -
HOBBY - JAZZ - COUNTRY -
NATION - OLDIES - FOLK M -
DOCUMENT - TESTS - ALARM
- (BACK TO NEWS)
Use the SKIP/SEARCH buttons
to select the particular program
after Programming is done.
VOL +/- buttons
Press these buttons to increase
or decrease the volume level.
The volume level can be change
from 0-30.
MUTE button
Press this button to turn mute
on or off. In mute or mode, the
sound is cut off.
Use this player as an
external power
amplifier
Power the player on and press
FUNCTION button until you
have entered AUX mode.
This player can be used as
power amplifier. To it for this
purpose you need:
11
a line-out port
22
With two one-pin plug which is
to connect both devices.
33
Play the audio player
44
Adjust the volume level.
Equalizer effect and bass/treble
level of this player.
29112 rev1 1/9/06 09:40 Page 11
STATION NAME - PROGRAM
Back to
An audio player ( a digital radio or
an MP3 digital audio player) with