Filter
Top Products
17
STEP 10 Rack Mounting Your PowerCenter
A) Remove your PowerCenter trim covers using a 3/32 Allen key (not included). Turn each Allen screw
counter-clockwise until it is completely removed.
B) Align one rack ear over the three 3/32 holes on the left side of the PowerCenter. Using a 3/32 Allen key,
turn each Allen screw clockwise until tight.
C) Align the remaining two holes on the left side of the rack ear with the two holes on the left side of your
rack. Using a screwdriver, turn two screws (not included) that fit the rack’s screw holes clockwise until tight.
D) Repeat steps B and C for installation of the rack ear on the right side of the PowerCenter.
Rack Ears