Filter
Top Products
6
HOOKUP GUIDE
STEP 1 DBS/DVD Phone Line Hookup
Please note that HTS2600 is not intended for hookup of any phone which carries two separate phone lines
on a single 4-pin jack.
A) Connect the end of your phone cable into the phone wall outlet. Plug the other end
into the HTS2600 "Phone In" jack (figure 1a).
B) Connect a second phone cable into one of the HTS2600 "Phone Out" jacks and into the input
on your DBS receiver or DVD player (figure 1b).
FOR STANDARD TELEPHONE LINE PROTECTION (NOT A PAY-PER-VIEW COMPONENT)
C) Connect a phone cable from the telephone wall jack to the HTS2600 "Phone In" jack. Connect a second
phone cable from one of the HTS2600 "Phone Out" jacks to the telephone (figure 1c).
IN
PHONE
OUT 1
OUT 2
Figure 1a
From telephone
wall jack
Figure 1b
To DBS receiver
or telephone
Figure 1
Figure 1c
To DVD/telephone cable