Filter
Top Products
Your Gold GS FX
The new GSFX is a completely new design from Monitor Audio. A combined di-pole and
monopole speaker for use in high-end or professional cinema applications.
In monopole mode the front firing RST
®
2 bass/ mid-range and C-CAM
®
tweeter
provide an accurate full-bandwidth sound-field for use in multiples or as a rear effect.
In di-pole mode the side firing drivers (one set at each end), combined with the tailored
output from the front firing driver, to provide a diffused sound-field for use as a pure
effect speaker in a more advance installation. The di-pole drivers have also been design
to be a 2-way compliment incorporating a 4” C-CAM
®
bass driver and 25mm C-CAM
®
gold dome tweeter. When in dipole mode the front tweeter is disconnected, and the
crossover frequency of the main driver lowered.
To remove the grille, carefully prize it away from the cabinet using you fingers. The
main grille locates in the elongated holes around the outside of the driver chassis. To
replace it, line the peg fixings (in the grille) up with the elongated holes and gently
press into place. The side grilles locate in recessed grommets in the cabinet itself.
These can be a very tight fixing.
For system set up please see positioning ideas on pages 7 and 8.
Frequency
Response
Sensitivity
(1W@1m)
Nominal
Impedance
(ohms)
Power
Handling
RMS (W)
Recommended
Amplifier
power output.
(W)RMS
60Hz –
43KHz
86dB 100 40 – 100
Drive Unit
Complement
External
Dimensions -
Excluding plinth
W x H x D
mm (inch)
Weight kg (lb)
1 x 6” RST
®
2
Bass/ Mid mono
-
pole driver
1 x 25mm Gold
Dome C-CAM
®
tweeter, 2 x 4”
C-CAM
®
mid di-pole
drivers, 2 x 25mm
Gold Dome C-CAM
®
di-pole tweeters
310 x 390
x 160
(12 3/16”
x 15 3/8”
x 6 5/16”)
11.5 / (25.3)
6
Maximum
S.P.L (Per pair in
room). dBA
106
External
Dimensions -
Including plinth
mm (inch)
Bass
Crossover
Frequency
Hz
N/A
Bass
Alignment
Sealed
Enclosure
Tweeter
crossover
frequency
kHz
2.7
N/A
© Monitor Audio Ltd 2005
V2
4.