Filter
Top Products
5
Fine-tuning the loudspeakers
The following adjustments can be made to your CP in-ceiling loudspeakers as follows:
1. Pivoting tweeters (all CP In-Ceiling models) can be tilted up to 18 degrees in all directions to provide
optimum coverage if the following applies:
2. If the speakers are widely separated such that the music fails to blend into a central image when
operated in stereo mode then tilt the tweeter towards the listening area.
3. If the Soundstage seems too confined tilt the tweeter away from the listening area.
4. For further fine-tuning options of your CP In-Ceiling speakers please go to page 6.
Specifications - In-Ceiling
Model
Gold CP
In-Ceiling
Silver CP
In-Ceiling
Bronze CP
In-Ceiling
Frequency
response
55Hz – 30KHz 60Hz – 30KHz 62Hz – 22 KHz
Impedance
(nominal)
8 Ohms 8 Ohms 8 Ohms
Sensitivity (1W@1M) 89dB 89dB 88dB
Maximum SPL 106.5 dBA 105.8 dBA 105 dBA
Power handling 120W 100W 80W
Recommended
Amp
requirements
30-120W 30-100W 20-80W
Bass alignment Sealed enclosure Sealed enclosure Sealed enclosure
Drive unit
complement bass
1x 6.5” C-CAM bass driver
featuring RST technology
1x 6” C-CAM bass driver
1x 6.5” MMP2 second
generation Metal Matrix
Polymer
Drive unit
complement
tweeter
Pivoting 25mm C-CAM gold
alloy dome with
high power ceramic
magnet system
Pivoting 25mm C-CAM gold
alloy dome with
rare earth magnet
Pivoting 25mm C-CAM gold
alloy dome with rare earth
magnet
Overall diameter 281mm (11 1/16 inch) 281mm (11 1/16 inch) 281mm (11 1/16 inch)
Overall depth 181mm (7 1/8 inch) 181mm (7 1/8 inch) 181mm (7 1/8 inch)
Cut-out hole
diameter
250mm (9 7/8 inch) 250mm (9 7/8 inch) 250mm (9 7/8 inch)
Mounting depth
mm (inch)
175mm (6 7/8 inch) 175mm (6 7/8 inch) 175mm (6 7/8 inch)
Controls
+3db / 0dB /
-
3dB
High frequency
attenuation switch.
+3db / 0dB / -3dB
Mid-range frequency
attenuation switch.
+3db / 0dB / -3dB
High frequency
attenuation switch
N/A
Fixing type 4 position ‘dog’ type fixings 4 position ‘dog’ type fixings 4 position ‘dog’ type fixings
Connection
Gold plated ‘push’ type
terminals
Gold plated ‘push’ type
terminals
Gold plated ‘push’ type
terminals
Baffle material MDF MDF MDF
Back box/
mounting flange
material
Mineral filled ABS plastic (UL
V1 fire rated)
Mineral filled ABS plastic (UL
V1 fire rated)
Mineral filled ABS plastic (UL
V1 fire rated)
Unit weight Kg
(lb)
3.0Kg (6.6Ib) 2.5Kg (5.5Ib) 2.4Kg (5.3lb)