Mobi Technologies 70060 Stereo Receiver User Manual


 
SAFETY TIPS
For proper setup and use, please read all instructions
Please keep this manual for future reference.
• This Product is not intended to be used as a medical monitor
and its
use should not replace adult supervision
• Periodically examine this product for damage to the cord,
housing
or other parts that may result in the risk of fire, electric shock or
injury.
• Never use transmitter and receiver near water (i.e. bathtub,
sink,etc.)
• The AC adaptor is not a toy
• Always use transmitter and receiver where there is adequate
ventilation. To prevent overheating, keep away from heat sources
such as radiators, heat registers, stoves, or other appliances that
produce heat.
Audio/Video Output Feature
The A/V feature of the MobiCam system allows you to link the Moni-
tor to a camcorder, computer, DVR or other video recording device,
so you can capture video and sound from the camera transmission.
The A/V Output jack (13) is located at the left side of the monitor.
Simply connect the supplied AV Connector Cord to the jack (13) and
connect the other end (Three RCA Connectors) to the Audio and
Video input jacks of your VCR, Camcorder, or TV set.
LCD On/O
This power saving feature is located on the side of the monitor (8).
This feature enables the Monitor to use less power and remain
operational as an audio-only monitor. The Monitor will resume
working with a clear picture when the LCD is switched to “on”.
5 10