Filter
Top Products
IF YOU NEED TO REPLACE THE EXTERNAL FUSE:
Disconnect supply cord before changing fuse. Replace fuse only with same type.
Remove the fuse cap and inspect the fuse. Look carefully at the fuse. If the wire filament inside the glass is bro-
ken, replace the fuse ONLY with one of the identical size and value. Using a fuse of a larger value will void your war-
ranty AND MAY CREATE A FIRE HAZARD. Plug the subwoofer back in. If it does not work, unplug it immediately, and
contact your dealer or M&K for service.
12. IF YOU NEED SERVICE
Contact your dealer or M&K. Please have the unit's model and serial numbers (found on the back of the cabinet),
date of purchase, the name of your dealer, and a complete description of the problem. You can call M&K between 8:30
AM and 5:00 PM Pacific Time, Monday through Friday, at (818) 701-7010. If you call outside these hours, leave a mes-
sage, and we will return your call. Alternatively, an e-mail can be sent to service@mksound.com.
DO NOT RETURN YOUR SPEAKERS TO THE FACTORY FOR
SERVICE WITHOUT OBTAINING PRIOR AUTHORIZATION
All M&K powered subwoofers carry a five year limited parts and labor warranty. This warranty is transferable to sub-
sequent owners up to three years from the date of original purchase, and it includes subwoofer amplifiers. It does not
cover abuse, misuse, repairs by unauthorized service stations, speakers without serial numbers, and speakers dam-
aged in shipping or by accident. If you have any questions about the warranty, please contact M&K.
13. M&K 5.1 MULTICHANNEL & PRO-LOGIC SYSTEM SETUP GUIDE
The 5 Most Important Items In System Setup:
1. Find the best location for the subwoofer for maximum output and flattest response
(usually the corner closest to the listening position)
2. Aim the front speakers (and the surrounds, if possible) vertically for the flattest
response and best imaging
3. Set all speakers to the Small setting for proper High-Pass and Low-Pass Filter
operation to get the lowest distortion and maximum dynamic range
4. Calibrate all speakers and the subwoofer to the identical level for proper imaging
and balance
5. Make sure all speakers are in phase for proper imaging and impact
These instructions will help you make sure that you cover all steps in setting up a 5.1 multichannel or Pro-Logic sur-
round sound system. In addition to following this list, make certain that you study and understand the owner’s manual
for each and every component used in the system, especially the processor/receiver’s manual. Have fun and good luck!
A useful tool for system setup is the DVD called Video Essentials. If you don’t have one, you can order it by visiting
www.videoessentials.com.
Here are the instructions for speaker setup.
A. Locate the front speakers. The left, right, and center speakers should be equidistant from the main
listening position. Try to set up the speakers so that they are reasonably symmetrical to room surfaces.
A tape measure may be very helpful.
POWERED SUBWOOFER
12