MK Sound S-90 Speaker User Manual


 
satellite speakers
page 5
FIGURE 1
WIRING WITH THE S-100B
AMPLIFIER
LEFT RIGHT
+
_
+
_
MADE IN USA
INPUT
4 ohms
MILLER & KREISEL SOUND CORPORATION
MIDRANGE
CONTOUR
10391 Jefferson Blvd., Culver City, CA 90232 310/204-2854
MID
EFFICIENCY
NORMAL
S-100B
SATELLITE SPEAKER
TREBLE
CONTOUR
MID
TWEETER
NORMAL
LOW
TWEETER
LOW
EFFICIENCY
SPECIAL INPUT
(see instructions)
CONNECT AMPLIFIER TO ONLY ONE RED
AND ONLY ONE BLACK TERMINAL
MADE IN USA
INPUT
4 ohms
MILLER & KREISEL SOUND CORPORATION
MIDRANGE
CONTOUR
10391 Jefferson Blvd., Culver City, CA 90232 310/204-2854
MID
EFFICIENCY
NORMAL
S-100B
SATELLITE SPEAKER
TREBLE
CONTOUR
MID
TWEETER
NORMAL
LOW
TWEETER
LOW
EFFICIENCY
SPECIAL INPUT
(see instructions)
CONNECT AMPLIFIER TO ONLY ONE RED
AND ONLY ONE BLACK TERMINAL
S-100B TREBLE CONTOUR SWITCH
The TREBLE CONTOUR switch slightly rolls off the upper midrange and treble frequencies when set to the MID
and LOW position. These carefully shaped contours minimize brightness due to room conditions, other electronics,
or the source material. It does more than a simple tweeter level control.
The LOW position gives the greatest reduction of high frequencies. The MID position gives a lesser reduction
of the highs, while the NORMAL position does not reduce high frequencies at all.
This control is useful not only to match your room environment and speaker location, but also because audio and
audio/video program material varies widely in terms of high frequency level and distortion. For example, many
recordings and film soundtracks have artificially boosted, excessive high frequencies that will be clearly reproduced
by the exacting and extended high frequency reproduction of your M&K Satellites, and the MID and LOW TWEETER
positions will help these recordings.
Don't hesitate to set this switch to MID or LOW for fear of the sound not being "flat". Few recordings are actually
"flat", due to equalization in the recording process, and artificial alteration of high frequencies is common.