Filter
Top Products
please see page 91 for speaker technical parameters.
55
PRS — speakers & passive crossover network
TS-T3PRS
1-1/4” (30 MM) FLUSH MOUNT SOFT DOME TWEETER
200 W
Max.
How low does your tweeter go? The tweeter must be able to play sweet and low with an extended
low-frequency response that can actually improve the overall imaging and staging of your audio
system. The TS-T3PRS has a large-sized, 30 mm Soft Dome Diaphragm for higher sound imaging
without any harshness. Its magnetic circuit uses an ultra-strong (30.5 g) Neodymium magnet for
faster and more precise transient response. The Sealed Performance Chamber is designed to extend
the crossover frequency down to 3 kHz. This chamber was carefully tuned using 4 different acoustic
damping materials.
3 - ø 4.3(3/16 Dia.) Holes 15 (9/16) 30 (1-1/4)
ø75 (3 D
ia.)
120°
120°
ø 87 (3 - 3/8 Dia.)
TS-M7PRS
6-3/4” (17 CM) MID-BASS DRIVER
200 W
Max.
200 W
Max.
The TS-M7PRS Mid-Bass Driver was meticulously designed to reproduce real
strings and vocals with less distortion. Thanks to the Aramid Fibre Composite Cone
and the Butyl Rubber Symmetrical Balanced Surround, you can expect smooth,
accurate sound from mid-bass to upper midrange frequencies. If it's precision
control of sound you're after, the TS-M7PRS comes highly recommended. And you
can combine it with the DEX-P9R and DEQ-P9R for the ultimate in acoustic pleasure.
• Aramid Fibre Composite Cone woofer
• Symmetrically balanced Butyl Rubber
Surround
• Aluminium die-cast frame
• Gold-plated binding post-screw
terminals
• Nominal input power: 60 W
• 28 – 10,000 Hz, 91 dB (1 W/1 m)
TS-W12PRS
12” (30 CM) DUAL VOICE COIL C-TYPE SUBWOOFER
1200 W
Max.
• Aramid Fibre Composite Cone woofer
• Dual 4 ohm Voice Coil design (2 or 8 ohm)
• VCCS (Voice Coil Cooling System)
• Aluminium die-cast frame
• Gold-plated binding post-screw terminals
• Low-Q design for use in small sealed box
• Lowest resonance frequency (Fs): 24 Hz
• Qts: 0.39
• Recommended Sealed Enclosure (± 10 %): 28 litres/1.0 cu. ft.
• Vas: 93 litres/3.3 cu. ft.
• Nominal input power: 300 W
• 15 – 2,000 Hz, 92 dB (1 W/1 m)
UD-N2PRS
2-WAY PASSIVE CROSSOVER NETWORK
Pioneer has designed a 2-way, passive crossover network especially for use with
the TS-T3PRS and TS-M7PRS. With its discriminating EMI (Electromagnetic
Interference) shielding chassis, the UD-N2PRS network provides simple, clear and
precise sound solutions.
4 - 4.5 x 6.5 Holes
(3/16 x 1/4 )
67.3 (2 - 5/8)
ø 170 (6 - 3/4 Dia.)
ø 158 (6 - 1/4) Dia.)
ø 100 (4 Dia.)
ø 143 (5 - 5/8 Dia.)
4
5
°
45°
19 (3/4)
ø 322 (12 - 3/4 Dia.)
ø
3
0
2
(11 - 7/8
D
ia
.)
8 - ø 6.5 Holes (1/4 Dia.)
133 (5-1/4)
ø 278 (11 Dia.)
152 (6)
8.3 (5/16)
95
142
33.
3
Introducing TS-W12PRS, a subwoofer that can
handle real power and equipped with the Voice
Coil Cooling System (VCCS), which together with
a giant magnetic circuit, draws heat away from
the inside of the sub, so that the sound stays
natural and your subwoofer keeps its cool.
There's also a 3” (76 mm) dual-layer long voice
coil (2 x 4 ohm) that, combined with the
extremely light Aramid Fibre Composite Cone,
results in a very strong moving force.
• 30 mm Polyester Fibre diaphragm
• Large Neodymium magnet (30.5 g)
• Die-cast aluminium flange
• Die-cast aluminium back chamber
• Nominal input power: 60 W
• 1,000 – 30,000 Hz, 92 dB (1 W/1 m)
• EMI (Electromagnetic Interference) shielding chassis
• Selected quality devices
• Tweeter attenuation: 0 dB/-3 dB
• Nominal input power: 60 W