Filter
Top Products
11
5. TECHNICAL SPECIFICATIONS
MODEL
8 ohms per channel(EIAJ)
4 ohms per channel(EIAJ)
8 ohms, 1KHz, 0.1%THD(EIAJ)
Bridge Mono Mode
Distortion (SMPTE-IM)
Frequency Response
Damping Factor, 1 kHz and below
Signal to Noise,20Hz-20KHz
Voltage Gain
Input Sensitivity @ 4 ohms
Input Clipping
Input Impedance
Controls
REAR: LIMITER, BRIDGE SELECTOR
MISTRAL6000
20Hz 20KHz@0.1%THD, Stereo Mode
<0.05%
20Hz-20KHz 1dB, -3dB points: 10Hz-60KHz
>400 at 8ohms
110dB,Aweight
40x (31dB)
6Vrms
10Vrms (+22dB)
10K ohms unbalanced, 20K ohms balanced 56 (36dB)
FRONT: AC SWITCH, CH1 & CH2 GAIN KNOBS
Continuously variable-speed fan, rear-to-front air flow
On/off muting, DC-fault load grounding relay. Internal fault fuses.
200-240(100-120) Vac 50~60Hz
19" (48.3 cm) rack mounting, 5.2" (13.3 cm) tall (3 rack spaces),
17.8" (45.3 cm) deep (rack mounting to rear support ears)
26.47Kg
1070W
1500W
3000W
PRELIMINART
Indicators (1 per channel)
Connectors, each channel
Cooling
Load Protection
Power Requirements
Dimensions
Net Weight
Power-On: Blue LED
Operation/Protection : Dual Color (Green/Red LED)
Limit: Red LED
Clip: Red LED
Input: Active balanced XLR
Parallel Output : XLR
Output: NEUTRIK Speakon and Binding posts
R