Mirage Loudspeakers OMNI 6 Speaker User Manual


 
owners manual
3
MOUNTING THE SPEAKERS
It is important to find a secure mounting location that, if possible, is not in
direct exposure to the elements, such as rain, high winds, or sunlight.The
speakers are weather resistant but optimally, a location should be chosen to
protect the speaker. Please use the following instructions and the illustration
at the end of this manual as a guideline on how to mount your new speakers:
1. Choose a secure location in order to mount the speaker; it is advisable
to mount the bracket to a solid wall surface, wall stud, or brick.
Mounting to aluminum siding, or eaves troughs, for example, will not
provide adequate strength to safely hold the speaker.
2. Before you install the bracket, you need to determine if the speaker will
be mounted in an upright, vertical or horizontal position. For best
performance, Mirage recommends positioning the speaker with the
grille facing downward at a height of approximately 6 feet (180cm)
(Diagram 1).
3. It is important to note that the adjustment pin on the mounting bracket
should always face the same direction as the speaker. For example,
when the grille is facing downwards, the adjustment pin on the bracket
should also face downwards. Only with this configuration can a secure
fit between the speaker and the bracket be achieved. (Diagram 2)
4. Use a pen to mark the mounting position of the bracket. (Diagram 3)
5. Mount the speaker bracket to the chosen location by using the
appropriate hardware to securely hold the weight of the speaker
(screws are not included in this package) (Diagram 4)
6. Hang the speaker onto the mounting bracket and hand tighten the
adjustment pin counterclockwise.This way the hook of the bracket will
slide into the groove of the speaker securely holding it in place.
(Diagram 5)
Mirage’s unique mounting bracket will allow you to easily install the speakers.
If you are not confident about the mounting procedures, please contact your
authorized MIRAGE retailer for assistance.
For additional information and mounting instructions on the amazing OASIS
OMNI series, please refer to the last two pages of this manual.