Filter
Top Products
®
Page 10 www.midlandradio.com
CHANNEL SELECTION (GMRS/FRS BAND)
Press the MENU button once, and then the buttons to select one
of the 28 GMRS/FRS channels. To confirm the selection, press the
PTT button or press the MENU button again to move to the next
feature setting.
SET
TING PRIVACY CODES
Your LXT460 Series has 121 Privacy Codes available to use in
channels 1~22. The selected Privacy Code may be different for each
channel. To select a Privacy Code for the current channel press the
MENU button twice, and then the buttons to select one of the
38 CTCSS Privacy Code. Press again the MENU button and the
button to select one of the 83 DCS Privacy Code. The Privacy
Code icon on the display will indicate whether you set your Privacy
Code in CTCSS or DCS mode. To confirm the selection, press the
PTT button or press MENU button again to move to the next feature
setting.
Note : If you select any CTCSS Privacy Code, any pre-selected
DCS Privacy Code will be cancelled and vice-versa.
Selecting a Privacy Code of "oF" will disable the Privacy feature.
To communicate between two LXT460 Series radios, all radios in
your group must be set to the same channel and/or Privacy Code
selections. The Privacy Code can only be set in channels 1~22.
TRANSMIT (TX) POWER LEVEL SELECTION
Your LXT460 has 2 power level settings. To select the power level on
channels 1~7 and 15~28, press the MENU button until a “Pr” icon will
appear blinking on the display. Then press the buttons to select
TRANSMIT POWER LEVEL icon (H: Hi/L: Lo). To confirm, press the
PTT button or press MENU button again to move to the next feature
setting. When the PTT button is pressed during Low Battery Level
condition, the TX Power will automatically switch from Hi(H) to
Lo(L) level.
Note : You cannot adjust the power setting on the FRS
channels (8~14). They are set to Low power per FCC
regulations.
/
Model LXT460 Series
/
!
/
!
/