Meyer Sound USM-1 Speaker System User Manual


  Open as PDF
of 4
 
Operating Instructions
Meyer Sound Laboratories, Inc.
2832 San Pablo Avenue
Berkeley, CA 94702
USM-1
Specifications
Notes:
1. Measured 1 meter on-axis to high horn, half-space conditions, pink noise input, in third
octave bands.
2. Loudspeaker driven with "A" weighted noise (peak-to-RMS ratio ≈ 12dB), with amplifier
rated at 300 W/channel at 8 ohms. The USM-1 will accommodate amplifiers capable of
output levels up to ±140vpk.
3. Refer to "USM-1 Overall Dimensions" for detailed dimensions. (Available from Meyer
Sound Labs. Inc.)
Acoustical - USM-1/S-1 System
Frequency response
1
40-18k Hz ±4 dB
Maximum SPL
2
Continuous 130 dB
Peak 139 dB
HF Distribution Pattern
Horizontal 70 degrees
Vertical 60 degrees
USM-1 Loudspeaker
Driver Complement
Low Frequency Driver MS-15
High Frequency Driver MS 2001A
High Frequency Horn 70 degree modified radical
HF DC Protection 20µF Polypropylene capacitor
Enclosure 2.3 cu. ft. vented, multi-ply
Finnish birch plywood
Finish Black textured
Physical Dimensions
3
21" W x 21.5" H x 18" D
Weight 82 lbs. (37.3 kg)
Protective Grill Hex perforated metal, powder
coated, charcoal-grey foam covering
Connector Cannon EP-4 (male)
EP-5 (male, Europe only)
Rigging (optional) Aircraft pan fittings, or M10 x 1.5
or
3
/8"-16 nut plate
© 1992,Meyer Sound. 05.151.012.01 A
 previous