A SERVICE OF

logo

Open as PDF
next previous
99-7508 KIT ASSEMBLY
5
DOUBLE DIN OR
STACKED ISO MOUNT UNITS PROVISION
Cut and remove the center bar from
the Radio Housing.
(Figure A)
1
Snap the Double DIN brackets to the
inside edge of the Radio Housing.
(Figure B)
2
Slide the Double DIN or stacked ISO
mount units into the bracket/radio
housing assembly then secure it to
the assembly using the screws sup-
plied with the Double DIN or ISO
mount units.
(Figure C)
3
Snap the Double DIN Trim plate onto
the front of the Radio Housing.
(Figure C)
4
Continue to final assembly.
*Note: Refer also to the instructions included with the aftermarket radio.
A
B
C