Metra Electronics 99-7426 Radio User Manual


  Open as PDF
of 8
 
99-7426 KIT ASSEMBLY
5
DOUBLE DIN RADIO PROVISION
Cut and remove the center bar from
the radio housing.
(Figure A)
1
Snap the Double DIN brackets to the
inside edge of the radio housing.
(Figure B)
2
Slide the Double DIN or ISO mount
unit(s) into the bracket/radio housing
assembly and secure the unit(s) to the
assembly using the screws supplied
with the unit(s).
(Figure C)
3
Snap the Double DIN trim plate onto
the front of the radio/housing.
(Figure C)
4
Continue to final assembly.
*Note: Refer also to the instructions included with the aftermarket radio.
A
B
C
STACKED ISO MOUNT UNITS PROVISION
 previous