Filter
Top Products
• SIMUL CLASS™ POWER.
• 95 WATTS PER CHANNEL: 4 X 6L6 PER CHANNEL.
• 2 "LEVEL", 2 "PRESENCE" CONTROLS PER CHANNEL.
• "DEEP EXTEND/NORMAL" VOICING SWITCH PER CHANNEL.
• "HALF DRIVE/FULL POWER VOICING/POWER REDUCTION” SWITCH PER CHANNEL.
• INDIVIDUAL "STANDBY" SWITCH FOR EACH CHANNEL.
• IMPROVED VENTING WITH 2 COOLING FANS PER CHANNEL.
• COLOR CODED POWER INDICATING LEDS FOR EACH CHANNEL.
• SIMUL-CLASS/CLASS A SWITCH (OPERATES WITH SWITCHING LOGIC).
• PARALLELED 1/4” INPUT FOR "MONO" OPERATION.
• "SWITCHTRACK" LOGIC PORT (1/4” JACK).
• 2 X 8, 2 X 4 SPEAKER OUTPUTS PER CHANNEL.
• REDUCED TO 3 RACK SPACES (5 1/4” HIGH) !
WHAT IS SWITCHTRACK?
SwitchTrack is like having two stereo power amps in one: Track 1 can be set for clean while
Track 2 is set to enhance distortion. It's like having Channel-switching in your power amp -
only more - because SwitchTrack is not limited to switching between clean response and
distortion.
You can easily set it to switch between two different clean sounds. Or two different distortion
sounds (one for crunch, another for lead) with different lows, highs, power levels and gain
structures.
HERE'S HOW SWITCHTRACK WORKS:
Each of the stereo channels (labeled A and B) has two separate control Tracks: 1 and 2.
(Think of them as recording "tracks" so they don't become confused with the stereo
"channels").
Each Track has its own Level and Presence controls, so there are switchable settings for
loudness and top-end. Plus, the tonal response of each Track can be shaped way differently
by using the two small rocker switches:
DEEP EXTEND boosts the bass frequencies for a huge, tight low-end "chunk," and HALF
DRIVE produces power amp distortion at greatly reduced volume levels, perfect for smaller
rooms or recording.
Whether used separately or together, these tone shapers reconfigure the power amp's
circuitry and dedicate it to profound distortion response. And when switched out, the world-
famous clean power of this amp's predecessor is retained with all it’s shimmering detail and
breath taking three-dimensionality.
Three-position rocker switches let you select whether each effect is "off" in both tracks (OUT),
"on" in both tracks (1 & 2), or "switched" on automatically whenever Track 2 is called up
(TRACK 2).
Virtually any switcher will work when plugged into the "Track Switching" jack on the rear. Our
TriAxis™ MIDI Pre-amp even has programmable switching ports built in.
2